Knowledge Base
Activating your C7 badge
This article describes how to activate C7 badge Prerequisites: Make sure you have installed the Cascade 500W gateway for either the Azure Swift Kit or AWS Allegro Kit. Activating the C7 The C7 contains a small, hidden button. To activate the battery on the C7, simply press and hold the button a few seconds. You […]
Activating your Minew S1 Temperature and Humidity Sensor
This article describes how to activate your Minew S1 Temperature and Humidity sensor. Prerequisites: Make sure you have installed the Cascade 500W gateway for either the Azure Swift Kit or AWS Allegro Kit. Activating the S1 The back of the S1 contains a small button. To activate the battery on the S1, simply press and […]
Changing the RS40 Occupancy Sensor LED Behavior
This article describes how to enable or disable the RS40 Occupancy Sensor LED Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have activated the RS-40 Occupancy Sensor. 1. Change an Individual RS40 LED Behavior To disable or enable the LED on an individual RS40, select that device from the […]
Video Tutorial: Configuring the APS-90E People Counter
Here's a quick video tutorial showing how to set up people counting on the APS-90E. Make sure you have already physically installed and networked your device before following this tutorial.
Configuring Counting for the APS-90E
This article describes how to configure the APS-90E device for people counting. Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have physically installed the APS-90E device in the area to be monitored. You have networked and retrieved the IP address of the APS-90E in IoT Central. 1. Login […]
Networking and Viewing the APS-90E in IoT Central
This article describes how to network and view the APS-90E device. Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have physically installed the APS-90E device in the area to be monitored. 1. Setup Network Connectivity There are two options for connecting the Cascade Gateway and the APS-90E. Both […]