Rigado’s Cascade Edge Data Network includes the ability to connect easily and securely to a wide range of sensors and devices, and even bundle their cost into the Cascade subscription.

We can connect to devices that meet any of the following criteria:

  • Bluetooth devices using standard protocols (e.g. iBeacon, Eddystone)
  • Bluetooth devices using custom profiles*
  • Wirepas Mesh devices (including Wirepas Positioning Engine)
  • Zigbee and Thread devices *
  • Wi-Fi devices (2.4 & 5 Ghz)
  • Ethernet & TCP/IP devices
  • USB 2.0 devices*
  • All pre-integrated devices & sensor partners listed below
*may require integration services from our Solutions team

The devices listed below represent a subset of our pre-integrated sensors grouped by typical Rigado use-cases.  Please contact us if you have questions about connecting with a specific device.

Occupancy & Presence

Understanding room occupancy and space utilization is proving key to many Smart Workplace and Smart Building applications.

Our solution partners often require real-time data about what’s happening in the buildings the own, operate and occupy.

Typical Rigado solutions that leverage occupancy and presence sensors include:

  • Smart Office / Smart Buildings
  • Space Utilization & Optimization
  • Desk Presence Monitoring
  • Conference / Focus Room Occupancy

⤓ RS 40 Occupancy Sensor

  • Small size; peel-and-stick mounting
  • Replaceable AAA batteries
  • Optional Dome Accessory covers sensor lens to narrow detection field
  • Configurable interval and sensitivity


  • Self-powered with integrated solar cell and optional backup battery
  • Provides illumination data in addition to presence information
  • Configurable interval and sensitivity

Temperature & Monitoring

The ability to measure and monitor temperature, humidity, air quality and other environmental conditions is a requirement of many Commercial IoT initiatives.

Rigado has partnered and integrated with a wide range of sensor options in this category – from relatively basic and inexpensive options, to CDC-compliant solutions for detailed logging of vaccine conditions.

Rigado solutions that leverage temperature & monitoring sensors include:

  • Cold-chain monitoring & food safety
  • Comfort & air quality for Smart Buildings
  • CDC-compliant vaccine monitoring
  • Supply-chain condition monitoring


  • Open-source software & hardware
  • Temperature, movement, air pressure, humidity, and proximity
  • Small form factor, IP67 protected
  • Easy to replace battery

S1 Sensor

  • Temperature, humidity, movement
  • Built-in flash memory to store up to 200 records
  • IP65 (indoor)


  • Temperature, Humidity, Dew Point CO2
  • Data logging for up to 84,650 measurements
  • Visual and audible high & low alarm thresholds
  • Self-calibrating NDIR CO2 sensor
  • Configurable sampling interval

Asset Tracking Beacons & Tags

Many of our solutions include location-based services, whether tracking key assets employees ‘by zone’ or providing RTLS positioning to place an asset on a map in real time.

Rigado gateways have been specifically designed for Bluetooth-based asset tracking solutions, and work with a variety of BLE assets and tags.

The types of Rigado solutions that often  include beacons and tags for asset tracking include:

  • Asset Tracking in Warehouses & Hospitals
  • Employee & Key Asset Location in Smart Buildings
  • Tracking people & equipment in construction zones and worksites

Tough Beacon TB15-1

  • UV resistant, impact resistant
  • Built in mounting bracket
  • Only 52x37x27mm
  • IP68

Asset Tag

  • Button, LED, accelerometer, temperature
  • Replaceable CR2450 battery
  • Compact 43x43x8mm
  • IP65

ID Card Tag & Accelerometer CT18-3

  • Button, accelerometer, temperature, LED
  • RFID
  • 86x55x4.5 mm
  • IP65

Assorted & General Purpose

The above categories address some of our most common use-cases and device partners – but certainly not all.

The range available IoT sensors and devices is huge, and – because we leverage open standards – Rigado is able to connect our gateways to nearly any device that uses Bluetooth, Wi-Fi, Zigbee, Thread or Wirepas Mesh.

Often, our team is asked to integrate with a set of existing devices (perhaps using an older wireless protocol) – as well as enable connectivity for a new set of devices in development. Our flexible and configurable Edge Connect solution makes this achievable – and affordable.

This section includes some additional devices for which we have pre-integrated solutions, and please contact our solutions team if you have questions about a specific sensor or device.


i7 Rock Beacon

  • External on/off multifunction button
  • Accelerometer, LED
  • Replaceable CR2477 battery
  • 50 x 15 mm
  • IP65

C6 Wearable Beacon

  • Accelerometer
  • Replaceable CR2032 coin battery (6mo)
  • Compact 42x31x11mm
  • IP65

i3 Tough Beacon

  • 5 year battery life
  • 2x AA replaceable batteries
  • 72 x 45 x 22 mm
  • IP66 Waterproof

Sticker Beacon

Minew Sticker Beacon
  • Ultra-thin 3.3mm, battery replaceable design
  • 50 meter advertising distance
  • 32 x 23 x 3.3 mm
  • Customizable case

Sticker Beacon Tag

  • Small size, user-friendly and portable
  • 50 meter advertising distance
  • 8 adjustable transmission levels
  • Ø 26 x 5 mm

Label Beacon Light Sensor

  • Small size, ultrasonic assembling technology
  • 50 meter transmission range, PCB antenna
  • Photoresistor light sensor
  • 42.5 x 23.5 x 5.3 mm

Beacon Plus

  • Beacon with optional accelerometer
  • 100 meter advertising distance
  • IP67 waterproof case with adhesive mounting
  • Ø 39 x 15.5 mm

Tag Beacon Accelerometer Sensor

  • Low power consumption 3-axis accelerometer
  • 90 meter advertising distance
  • Customizable waterproof case with keychain hole
  • 36.5 x 23.7 x 5.0 mm

DearBeacon E9

  • Can include optional NFC tag
  • 100 meter advertising distance
  • IP67 waterproof case with two screw holes for firm mounting
  • Ø 49 x 66 x 17.5 mm

Easyfit Single/Double Rocker Pad

  • Self-powered, never require batteries
  • 10 meter range
  • Single: 126 x 82 x 19 mm
  • Double: 126 x 115 x 18 mm


Have a project or pilot you’re working on?

Connect with our Solutions Team



The Latest From Rigado


How Rigado Edge Connect Accelerates Enterprise IoT Deployments

October 23, 2019

Earlier this month we were excited to announce the launch of the Rigado Edge Connect platform [watch the webinar announcement]. Those familiar with Rigado might note that Edge Connect was already an essential piece of our Edge-as-a-Service solution, enabling edge applications to interact with Bluetooth devices through a standard API. However, this latest release of […]

Read More


Partner Webinar: Inside a Bluetooth-Powered Smart Stadium Solution

December 4, 2019

In this 30-minute webinar Losant and Rigado will share the story of how our technologies combined to power an IoT Smart Stadium solution that delivered real-time insights about stadium occupancy during the 2019 Western & Southern Open tennis tournament in Cincinnati. Losant Solutions Engineer Scott Allen and Rigado CRO Kevin Tate will …

Read More

Press Release

Rigado adds EnOcean Energy Harvesting Sensors and Switches to its Pre-Integrated Bluetooth Devices Program

November 13, 2019

The integration of the EnOcean EasyFit sensors and switches into the growing Rigado device program supports energy-conscious solutions for Smart Enterprise Portland, OR – November 13, 2019 – Rigado is pleased to announce the addition of the EasyFit Bluetooth sensors and switches by EnOcean to its portfolio of pre-integrated and …

Read More

Stay up-to-date with the Rigado Newsletter