This article describes how to activate C7 badge

Prerequisites:

• Make sure you have installed the Cascade 500W gateway for either the Azure Swift Kit or AWS Allegro Kit.

Activating the C7

The C7 contains a small, hidden button. To activate the battery on the C7, simply press and hold the button a few seconds.  You should notice the blue LED on the front flash.

Once the button has been pushed and the LED flashes, it will remain powered.  Note that subsequent button pushes will NOT result in the LED flashing, but the device will remain powered on.

Once active, the C7 will automatically connect to the Cascade-500W and begin sending beacon data. Now, you can setup a visual dashboard with the C7.

Next up: Adding an E8 to an IoT Central Dashboard (for Azure Swift Kit users).