This article describes how to connect the 2.9 inch Rigado E-Status Display to IoT Central . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. 1. Verify the device is online The E-Status Display comes powered one and will automatically connect to any Cascade Gateway in range. As long as […]
This article describes how to modify the display text on the 2.9 inch Rigado E-Status Display . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have verified the E-Status Display is online. 1. Default text options Rigado has pre-built a series of messages that can be displayed on the status […]
In our latest webinar, “People Counting and Occupancy for Commercial Spaces,” we introduced Rigado partner HELLA Aglaia, experts in stereoscopic people sensing who developed our latest integrated sensor device, the APS-90E. The webinar recording is available here, and the APS-90E is now featured in our integrated partner device list. Let’s take a look at some […]
Presence To use the RS40 occupancy sensor to detect presence of a location such as a room or hallway it is recommended to place the sensor on the ceiling to give it the largest unobstructed view of the desired area. Alternatively you can place it above doorways or on a wall, it is suggested to […]
RS40 Occupancy Sensor Placement Placement and installation of the RS40 occupancy sensor is very important in order to get good occupancy data. This sensor uses Passive Infrared technology to detect the motion of heat. It is line of sight: any opaque object will block the sensor’s view and limit coverage. Similarly, windows will also block […]
By default, the Presto Kit sensors are configured for an optimal combination of “real-time” effect and data use optimization. These settings can be tuned post-install if you have a specific use case in mind, keeping in mind the data consumption limits of IoT Central. Here are the default settings for each device: Hobo MX-100 Temp […]