How often does the sensor data refresh?

By default, the Presto Kit sensors are configured for an optimal combination of “real-time” effect and data use optimization. These settings can be tuned post-install if you have a specific use case in mind, keeping in mind the data consumption limits of IoT Central.

Here are the default settings for each device:

Hobo MX-100 Temp Monitor:  Every 2 minutes

RS40 Occupancy Sensor: Every 30 seconds, and immediately whenever there is a change in “occupied state.”

E8 Asset Tag: Every 2 minutes, or immediately when motion is detection

Flic Button: Whenever the button is pressed.