Knowledge Base
Introduction to the Hella APS-90E
The Hella SP-90E is an advanced people sensing camera with a variety of features, including people counting, zone monitoring, and camera recording. This guide will focus on setting up the APS90-E as part of the Rigado Swift kit. The complete documentation for the Hella APS-90E can be downloaded here. This includes tips on physical installation […]
Connecting the E-Status Display to IoT Central
This article describes how to connect the 2.9 inch Rigado E-Status Display to IoT Central . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. 1. Verify the device is online The E-Status Display comes powered one and will automatically connect to any Cascade Gateway in range. As long as […]
Changing the Text on the Rigado E-Status Display
This article describes how to modify the display text on the 2.9 inch Rigado E-Status Display . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have verified the E-Status Display is online. 1. Default text options Rigado has pre-built a series of messages that can be displayed on the status […]
Interpreting data from the RS40
Presence To use the RS40 occupancy sensor to detect presence of a location such as a room or hallway it is recommended to place the sensor on the ceiling to give it the largest unobstructed view of the desired area. Alternatively you can place it above doorways or on a wall, it is suggested to […]
RS40 Installation
RS40 Occupancy Sensor Placement Placement and installation of the RS40 occupancy sensor is very important in order to get good occupancy data. This sensor uses Passive Infrared technology to detect the motion of heat. It is line of sight: any opaque object will block the sensor's view and limit coverage. Similarly, windows will also block […]
Creating Alerts with the RS40 Occupancy Sensor
This article describes how to create an email alert using the RS40 Occupancy Sensor . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have activated the RS40 Occupancy Sensor. You have verified the RS40 Occupancy Sensor is online. 1. Create an Alert From your IoT Central application, select Rules […]