Adding the E8 Asset Tracker to an IoT Central Dashboard

This article describes how to add your E8 Asset Tracker to an IoT Central Dashboard. Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have activated the E8 asset tracker. 1. Verify the E8 is online First we will confirm your E8 is online and sending data. Make sure it […]

Read More


Activating your E8 Asset Tracker

This article describes how to activate your E8 Asset Tracker. Prerequisites: Make sure you have installed the Cascade-500W gateway and configured your IoT Central Application. Activating the E8 The E8 contains a small plastic tab, visible from the end of the device. To activate the battery on the E8, simply pull the tab out and […]

Read More


Rigado Presto: What’s in the box

Welcome to the Rigado Presto Kit The next few articles will get you up and running with the Presto Kit. If you run into any trouble, check the Knowledge Base for helpful tips and more in-depth discussion. What’s in the Box? The standard Rigado Presto kit includes the following:   Note: if you have received […]

Read More


Introduction to the Rigado Presto kit

The Rigado Presto kit is a pre-integrated set of Bluetooth gateway and sensor devices that make it easy to create IoT applications. The Presto kit can be used in conjunction with Microsoft Azure IoT Central to build dashboards, alerts, and integrations with other applications. You can use the Presto Kit to accelerate the proof-of-concept process […]

Read More


Building the Safe Workplaces dashboard with the RS40

This article describes how to setup a safe workplaces dashboard using the Presto Kit and the RS40 occupancy sensor. Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have activated the RS40 Occupancy Sensor. You have verified the RS40 Occupancy Sensor is online. 1. Add the Current Status Tile First […]

Read More


How do I determine which sensor is which in my Rigado Presto kit?

Activated all of your sensors at the same time and forgot to label them?  No problem!  Here are a few tips to tell them apart: Flic Button: Simply do several button pushes and see which counter increments in your IoT Central Dashboard Occupancy Sensor: Place one in a concealed area such as a desk, and […]

Read More